SAJ 22KW Solar Pump Controller

0.00

SAJ SOLAR PUMP CONTROLLER SAJ 22KW Solar Pump Controller

The SAJ Solar Pump Controller is a variable-speed motor drive. Designed to run any IEC three-phase asynchronous motor.

The solar pumping system provides water to remote locations by converting high voltage, direct current from a solar array into alternating current to run a standard three-phase asynchronous motor.

When solar power is not available, the controller can be switched manually to an alternate 3-phase AC input such as a generator or inverter from the battery, if available.

The controller provides fault detection, motor soft start, and speed control. The solar pump controller is designed to provide these features with the plug-and-play ease of installation.

The SAJ Solar Pump controller is designed with the high standard of reliability expected of products. The controller attempts to drive the pump and motor to deliver water even under adverse conditions, reducing output as necessary to protect the system components from damage, and only shutting down in extreme cases. Full operation is restored automatically whenever abnormal conditions subside.

SAJ 22KW Solar Pump Controller

PDS33-4T022 SAJ Solar Pump Controller:

The SAJ Solar Pump Controller is based on a standard platform controlling a standard 3-Phase asynchronous motor driving a pump powered by a solar array on an option AC generator backup.

The SAJ solar controller continuously monitors system performance and incorporates a number of features for pumping system protection in the event of a fault, the SAJ solar pumping system is optimized for pumping under adverse input power conditions unique to solar arrays. internal diagnostics will tolerate a lower input voltage.

Whenever possible, the controller attempts to drive the pump load by maximizing power output from the solar array. SAJ series remote system monitoring a LED display provides a detailed indication of system status.

PROTECTION FEATURES:

  • Electronic monitoring gives the controller the capability to monitor the system and automatically shut down the
    SAJ 22KW Solar Pump Controller
    SAJ 22KW Solar Pump Controller

    event Off.

  • Dry well conditions – With low-level switch.
  • Bound pump – with auto reversing torque.
  • High voltage surge.
  • Low input voltage
  • open motor circuit.
  • Short circuit.
  • Overheat.

 

 

 

DOWN LOAD:

SAJ Solar Pumping System Catalogue                                                      PDS33 CE Certificate

 

SAJ 22KW Solar Pump Controller
SAJ 22KW Solar Pump Controller
Manufacturer:

SAJ Electric

Model:

PDS33-4T022

Controller Type:

MPPT (Maximum Power Point Tracking)

Reviews

There are no reviews yet.

Be the first to review “SAJ 22KW Solar Pump Controller”

You may also like…

X
Have no product in the cart!
0